MKDSN 2.5 /3

https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 16 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 3, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to create different nos. of positions! The illustration shows a 2-position version Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Extremely small design for the respective conductor cross section  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 250 STK GTIN GTIN 4017918169473 Weight per Piece (excluding packing) 4.340 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 9.5 mm Pitch 5 mm Dimension a 10 mm Width 15 mm Constructional height 15 mm Height 18.5 mm 01/12/2017   Page 1 / 7 https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Technical data Dimensions Length of the solder pin 3.5 mm Pin dimensions 0,8 x 0,9 mm Pin spacing 5 mm Hole diameter 1.3 mm General Range of articles MKDSN 2,5 Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 16 A Nominal cross section 2.5 mm² Maximum load current 16 A (with a 2.5 mm² conductor cross section) Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Internal cylindrical gage A3 Stripping length 6.5 mm Number of positions 3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 0.75 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 01/12/2017   Page 2 / 7 https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Technical data Connection data 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.75 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1.5 mm² Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram a Dimensional drawing 9,5 2,5 a+5 3,5 4,75 15 5 1,3 4,75 2,5 5 a 01/12/2017   Page 3 / 7 https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Diagram Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals 01/12/2017   Page 4 / 7 https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Approvals Approvals VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized Ex Approvals Approval details VDE Gutachten mit Fertigungsüberwachung    http://www.vde.com/en/Institute/OnlineService/ VDE-approved-products/Pages/Online-Search.aspx     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 24 A Nominal voltage UN 250 V EAC   cULus Recognized      40018557  B.01742  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D mm²/AWG/kcmil 30-12 30-12 Nominal current IN 20 A 10 A Nominal voltage UN 300 V 300 V Accessories Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2     01/12/2017   Page 5 / 7 https://www.phoenixcontact.com/gb/products/1890976 PCB terminal block - MKDSN 2,5/ 3 - 1890976 Accessories Insertion bridge - EBP 3- 5 - 1733172 Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 3     Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK 5/3,8:UNBEDRUCKT - 0805409 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, Mounting type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm     01/12/2017   Page 6 / 7 https://www.phoenixcontact.com/gb/products/1890976 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/12/2017   Page 7 / 7